| FASTENER LENGTH | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| HEAD DIAMETER | 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| HEAD HEIGHT | 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| HEAD STYLE | FILLISTER |
| HOLE CONFIGURATION STYLE | ROUND |
| HOLE DIAMETER | 0.047 INCHES NOMINAL |
| HOLE QUANTITY | 1 |
| HOLE TYPE | DRILLED |
| INTERNAL DRIVE STYLE | SLOT |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | STEEL COMP 302 OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 316 OVERALL |
| POINT LENGTH | 0.109 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| POINT STYLE | CHAMFER DOG |
| POINT CHAMFER ANGLE | 90.0 DEGREES NOMINAL |
| POINT DIAMETER | 0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD LENGTH | 0.105 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNF |