|
|
|
National Stock Number:
5305-00-454-1175
Federal Supply Class:
5305
National Item Identification Number:
004541175
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| NAS1134V9 | 04348 | LAWRENCE ENGINEERING AND SUPPLY INC | | NAS1134V9 | 07851 | NOR-CAL SUPPLY CO | | NAS1134V9 | 17446 | HUCK INTERNATIONAL, INC | | NAS1134V9 | 30902 | F AND C SALES INC | | NAS1134V9 | 53606 | PLASTIC AND METAL PRODUCTS CORPORATION | | NAS1134V9 | 56878 | SPS TECHNOLOGIES, LLC | | NAS1135V9 | 08938 | AIR INDUSTRIES CO INC | | NAS1134V9 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | NAS1134V9 | 73197 | HI-SHEAR CORPORATION | | NAS1134V9 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NAS1134V9 | 80539 | SPS TECHNOLOGIES, LLC | | NAS1134V9 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | NAS1134V9 | 97928 | HUCK INTL INC | | NAS1134V9 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | NAS1135V9 | 50568 | APCOM INC |
|
Techincal Specification:
| FASTENER LENGTH | 0.863 INCHES MINIMUM AND 0.893 INCHES MAXIMUM | | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | HEAD HEIGHT | 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM | | HEAD DIAMETER | 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM | | HEAD STYLE | PAN | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | NAS 621,6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY UNS R54520 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.291 INCHES MINIMUM AND 0.341 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 28 |
|
|