|
|
|
National Stock Number:
5305-00-453-7478
Federal Supply Class:
5305
National Item Identification Number:
004537478
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| NAS1133V1 | 04348 | LAWRENCE ENGINEERING AND SUPPLY INC | | NAS1133V1 | 07851 | NOR-CAL SUPPLY CO | | NAS1133V1 | 08938 | AIR INDUSTRIES CO INC | | NAS1133V1 | 17446 | HUCK INTERNATIONAL, INC | | NAS1133V1 | 30902 | F AND C SALES INC | | NAS1133V1 | 50568 | APCOM INC | | NAS1133V1 | 53606 | PLASTIC AND METAL PRODUCTS CORPORATION | | NAS1133V1 | 56878 | SPS TECHNOLOGIES, LLC | | NAS1133V1 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | NAS1133V1 | 73197 | HI-SHEAR CORPORATION | | NAS1133V1 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NAS1133V1 | 80539 | SPS TECHNOLOGIES, LLC | | NAS1133V1 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | NAS1133V1 | 97928 | HUCK INTL INC | | NAS1133V1 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| FASTENER LENGTH | 0.323 INCHES MINIMUM AND 0.353 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM | | HEAD DIAMETER | 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM | | HEAD HEIGHT | 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM | | HEAD STYLE | PAN | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | NAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.251 INCHES MINIMUM AND 0.301 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|