|
|
|
National Stock Number:
5305-00-450-7459
Federal Supply Class:
5305
National Item Identification Number:
004507459
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| NAS1125C1H | 04348 | LAWRENCE ENGINEERING AND SUPPLY INC | | NAS1125C1H | 07851 | NOR-CAL SUPPLY CO | | NAS1125C1H | 08938 | AIR INDUSTRIES CO INC | | NAS1125C1H | 17446 | HUCK INTERNATIONAL, INC | | NAS1125C1H | 30485 | QUALIFIED AIR COMPONENTS INC. | | NAS1125C1H | 30902 | F AND C SALES INC | | NAS1125C1H | 50568 | APCOM INC | | NAS1125C1H | 53606 | PLASTIC AND METAL PRODUCTS CORPORATION | | NAS1125C1H | 56878 | SPS TECHNOLOGIES, LLC | | NAS1125C1H | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | NAS1125C1H | 73197 | HI-SHEAR CORPORATION | | NAS1125C1H | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | NAS1125C1H | 80539 | SPS TECHNOLOGIES, LLC | | NAS1125C1H | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | NAS1125C1H | 97928 | HUCK INTL INC | | NAS1125C1H | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| FASTENER LENGTH | 0.422 INCHES MINIMUM AND 0.452 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | GRIP LENGTH | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM | | HARDNESS RATING | 248.0 BRINELL STANDARD MINIMUM AND 341.0 BRINELL STANDARD MAXIMUM OVERALL | | HEAD DIAMETER | 0.429 INCHES MINIMUM AND 0.438 INCHES MAXIMUM | | HEAD HEIGHT | 0.162 INCHES MINIMUM AND 0.183 INCHES MAXIMUM | | HEAD STYLE | FILLISTER | | HOLE CONFIGURATION STYLE | ROUND | | HOLE DIAMETER | 0.064 INCHES NOMINAL | | HOLE QUANTITY | 2 | | HOLE TYPE | DRILLED | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD LENGTH | 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|