|
|
|
National Stock Number:
5305-00-438-4029
Federal Supply Class:
5305
National Item Identification Number:
004384029
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 885226-6 | 59364 | HONEYWELL INTERNATIONAL INC. | | 885226-6 | 99193 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.300 INCHES MINIMUM | | FASTENER LENGTH | 1.310 INCHES MINIMUM AND | | 1.330 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | HEAD STYLE | FILLISTER EXTENDED WASHER | | HEAD DIAMETER | 0.340 INCHES MINIMUM AND | | 0.360 INCHES MAXIMUM | | HEAD HEIGHT | 0.183 INCHES MINIMUM AND | | 0.196 INCHES MAXIMUM | | EXTENDED WASHER DIAMETER | 0.438 INCHES NOMINAL | | EXTENDED WASHER THICKNESS | 0.040 INCHES MINIMUM AND | | 0.050 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | HOLE CONFIGURATION STYLE | ROUND | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | HOLE DIAMETER | 0.047 INCHES NOMINAL | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 2 | | FIRST DIAMETER FROM HEAD | 0.095 INCHES MINIMUM AND | | 0.105 INCHES MAXIMUM | | SECOND DIAMETER FROM HEAD | 0.252 INCHES MINIMUM AND | | 0.255 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.690 INCHES MINIMUM AND | | 0.710 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 0.813 INCHES MINIMUM AND | | 0.817 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 59364 | | DESIGN CONTROL REFERENCE | 885226-6 |
|
|