|
|
|
National Stock Number:
5305-00-435-8991
Federal Supply Class:
5305
National Item Identification Number:
004358991
Description:
SCREW,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING.
|
Manufacturer Information:
| 20C3259-1 | 92755 | NORTHROP GRUMMAN SYSTEMS CORP |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 2A | | THREAD LENGTH | 0.370 INCHES MINIMUM AND | | 0.390 INCHES MAXIMUM | | FASTENER LENGTH | 1.010 INCHES NOMINAL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.300 INCHES MINIMUM AND | | 0.320 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.370 INCHES MINIMUM AND | | 0.390 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | FIRST DIAMETER FROM HEAD | 0.190 INCHES MINIMUM AND | | 0.200 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.620 INCHES MINIMUM AND | | 0.640 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 92755 | | DESIGN CONTROL REFERENCE | 20C3259-1 |
|
|