|
|
|
National Stock Number:
5305-00-427-8686
Federal Supply Class:
5305
National Item Identification Number:
004278686
Description:
SCREW,CLOSE TOLERANCE
Detail:
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
|
Manufacturer Information:
| 4039023 | 00088 | ROYAL OAK GAGE INC | | 4039023 | 77445 | RTX CORPORATION | | 4039023 | 80539 | SPS TECHNOLOGIES, LLC | | 4039023 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.425 INCHES MINIMUM AND | | 0.475 INCHES MAXIMUM | | FASTENER LENGTH | 1.045 INCHES MINIMUM AND | | 1.075 INCHES MAXIMUM | | MATERIAL | IRON ALLOY 660 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 24.0 ROCKWELL C MINIMUM AND | | 35.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 130000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 85000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.359 INCHES MINIMUM AND | | 0.385 INCHES MAXIMUM | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) | | GRIP LENGTH | 0.600 INCHES MINIMUM AND | | 0.620 INCHES MAXIMUM | | GRIP DIAMETER | 0.1880 INCHES MINIMUM AND | | 0.1890 INCHES MAXIMUM |
|
|