| BONNET ATTACHMENT METHOD | THREADED |
| BONNET TYPE | INSIDE SCREW |
| CONNECTION TYPE | UNTHREADED INTERNAL PIPE ALL ENDS |
| CONNECTION STYLE | SOCKET WITH BRAZING RING ALL ENDS |
| FEATURES PROVIDED | BONNET PACKING |
| FLOW CONTROL DEVICE | DISK |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B164-61 ASSN STD ALL MATERIAL RESPONSES SEAT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-390 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-288 FED SPEC 1ST MATERIAL RESPONSE AND QQ-N-286 FED SPEC 2ND MATERIAL RESPONSE OR QQ-N-286 FED SPEC 3RD MATERIAL RESPONSE STEM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-288 FED SPEC SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE |
| MATERIAL | COPPER ALLOY 922 BODY |
| MATERIAL | NICKEL ALLOY AND NICKEL ALLOY K-500 OR NICKEL ALLOY 502 STEM |
| MATERIAL | NICKEL ALLOY 400 OR NICKEL ALLOY R-405 SEAT |
| MATERIAL | NICKEL ALLOY FLOW CONTROL DEVICE |
| MAXIMUM OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH 2ND RESPONSE |
| MAXIMUM OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH 3RD RESPONSE |
| MAXIMUM OPERATING TEMP | 150.0 FAHRENHEIT 2ND RESPONSE |
| MAXIMUM OPERATING TEMP | 150.0 FAHRENHEIT 3RD RESPONSE |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH 1ST RESPONSE |
| MAXIMUM OPERATING TEMP | 425.0 FAHRENHEIT 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS 2ND RESPONSE |
| MEDIA FOR WHICH DESIGNED | WATER, SALT 3RD RESPONSE |
| MEDIA FOR WHICH DESIGNED | STEAM 1ST RESPONSE |
| NOMINAL PIPE SIZE ACCOMMODATED | 1.250 INCHES ALL ENDS |
| RENEWABLE SEAT RING TYPE | THREADED |
| SPECIAL FEATURES | NUT-SLEEVE 2,PREINSERTED RING IN ENDS 2 |
| STYLE DESIGNATOR | ANGLE |
| TEST DATA DOCUMENT | 80064-810-1385722 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| VALVE OPERATION METHOD | MANUAL |