| APERTURE DIAMETER | 0.032 INCHES NOMINAL |
| CONNECTION TYPE | THREADED EXTERNAL BOSS 2ND END |
| CONNECTION TYPE | THREADED INTERNAL BOSS 1ST END |
| CONNECTION STYLE | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END |
| CONNECTION STYLE | GASKET SEAL (BOSS) 1ST END |
| DISK LOADING METHOD | SPRING |
| FLOW CONTROL DEVICE | POPPET |
| MATERIAL | ALUMINUM ALLOY 518.0 BODY |
| MATERIAL | ALUMINUM ALLOY 518.0 SEAT |
| MAXIMUM OPERATING TEMP | 275.0 FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MOUNTING POSITION | HORIZONTAL OR VERTICAL |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 2ND END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.437 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.437 INCHES 2ND END |
| SPECIAL FEATURES | THE END CONNECTION IDENTIFIED ABOVE AS THE SECOND END IS THE VALVE INLET |
| STYLE DESIGNATOR | STRAIGHT THRU |
| SURFACE TREATMENT | ANODIZE |
| THREAD CLASS | 3A 2ND END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 20 1ST END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| VALVE OPERATION METHOD | AUTOMATIC |