| BONNET ATTACHMENT METHOD | INTEGRAL |
| BONNET TYPE | INSIDE SCREW |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL PIPE 1ST END |
| CONNECTION STYLE | PLAIN (PIPE) 2ND END |
| CONNECTION STYLE | PLAIN,OPTIONAL END(PIPE) 1ST END |
| DISK LOADING METHOD | SPRING |
| FEATURES PROVIDED | PRESSURE TIGHT OUTLET SIDE |
| FLOW CONTROL DEVICE | POPPET |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| MAXIMUM OPERATING TEMP | 450.0 FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS 2ND RESPONSE |
| NOMINAL PIPE SIZE ACCOMMODATED | 0.375 INCHES 2ND END |
| NOMINAL PIPE SIZE ACCOMMODATED | 0.500 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.375 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.500 INCHES 1ST END |
| OPENING PRESSURE SETTING | 10.0 POUNDS PER SQUARE INCH |
| STYLE DESIGNATOR | ANGLE |
| SPECIAL FEATURES | THE END CONNECTION IDENTIFIED ABOVE AS THE SECOND END IS THE VALVE INLET |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | NPT 1ST END |
| THREAD SERIES DESIGNATOR | NPT 2ND END |
| VALVE OPERATION METHOD | AUTOMATIC |