|
|
|
National Stock Number:
4820-00-446-3236
Federal Supply Class:
4820
National Item Identification Number:
004463236
Description:
VALVE,ANGLE
Detail:
A valve with one inlet and one outlet connection with outlet flow at an angle to inlet flow. The flow is controlled by the action of a stem which lifts disks perpendicularly off the center axis of its seat. It may be inline or cartridge (manifold) design. Excludes VALVE (1), Y; VALVE, STOP-CHECK; and COCK, SHUTOFF, SCREW STEM.
|
Manufacturer Information:
| 6433N | 28193 | HENRY TECHNOLOGIES, INC. | | MIL-DTL-20064 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | R33249 | 23587 | FRICK CO | | MIL-DTL20064-TP3-CL3 SZ 1/2IN | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILV20064 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BONNET ATTACHMENT METHOD | BOLTED | | BONNET TYPE | INSIDE SCREW | | CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END | | CONNECTION TYPE | UNTHREADED INTERNAL TUBE 1ST END | | CONNECTION STYLE | FLARED (TUBE) 2ND END | | CONNECTION STYLE | SOCKET (TUBE) 1ST END | | FURNISHED ITEMS AND QUANTITY | 1 CAP AND 1 CHAIN | | FEATURES PROVIDED | BONNET PACKING | | FLOW CONTROL DEVICE | DISK | | MATERIAL | COPPER ALLOY BODY | | MATERIAL | COPPER ALLOY SEAT | | MATERIAL | COPPER ALLOY STEM | | MATERIAL | LEAD FLOW CONTROL DEVICE | | MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | REFRIGERANT 12 SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES 1ST END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.750 INCHES 2ND END | | NONDEFINITIVE SPEC/STD DATA | III TYPE AND 8 CLASS | | SEAT ANGLE | 45.0 DEGREES 2ND END | | STYLE DESIGNATOR | ANGLE | | TEST DATA DOCUMENT | 81349-MIL-V-22064 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND 2ND END | | THREAD CLASS | 2A 2ND END | | THREAD SERIES DESIGNATOR | UNF 2ND END | | THREAD QUANTITY PER INCH | 26 2ND END | | VALVE OPERATION METHOD | MANUAL |
|
|