| BOLT HOLE NOMINAL DIAMETER | 0.281 INCHES 1ST END |
| BOLT HOLE NOMINAL DIAMETER | 0.328 INCHES 2ND END |
| BOLT HOLE QUANTITY | 10 1ST END |
| BOLT HOLE QUANTITY | 4 2ND END |
| BOLT CIRCLE NOMINAL DIAMETER | 3.125 INCHES 1ST END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.375 INCHES 2ND END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.375 INCHES 2ND END |
| CONNECTION TYPE | FLANGE ALL ENDS |
| FLANGE FACE DESIGN | PLAIN ALL ENDS |
| FLANGE SHAPE | RECTANGULAR WITH HOLES 2ND END |
| FLANGE SHAPE | ROUND WITH HOLES 1ST END |
| FLOW CONTROL DEVICE | DISK |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-601 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY OVERALL |
| MAXIMUM OPERATING TEMP | 160.0 FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 60.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MOUNTING POSITION | HORIZONTAL OR VERTICAL |
| NOMINAL LENGTH | 3.000 INCHES 2ND END |
| NOMINAL OUTSIDE DIAMETER | 3.875 INCHES 1ST END |
| NOMINAL THICKNESS | 0.250 INCHES ALL ENDS |
| NOMINAL WIDTH | 3.000 INCHES 2ND END |
| STYLE DESIGNATOR | STRAIGHT THRU FLANGED ENDS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |
| VALVE OPERATION METHOD | AUTOMATIC OR MANUAL |