|
|
|
National Stock Number:
4810-00-554-8862
Federal Supply Class:
4810
National Item Identification Number:
005548862
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| 110865 | 79318 | MEGGITT NORTH HOLLYWOOD INC | | 110865-1 | 79318 | MEGGITT NORTH HOLLYWOOD INC |
|
Techincal Specification:
| APERTURE DIAMETER | 0.604 INCHES MINIMUM AND 0.614 INCHES MAXIMUM | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | CLOSED | | FLOW CONTROL DEVICE | PISTON | | MATERIAL | NICKEL ALLOY BODY | | MATERIAL | NICKEL ALLOY SEAT | | PROPRIETARY CHARACTERISTICS | PACS | | MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.750 INCHES 1ST END | | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END | | OFFSET DISTANCE | 0.940 INCHES | | SEAT ANGLE | 37.0 DEGREES 1ST END | | VALVE OPERATION METHOD | SOLENOID | | STYLE DESIGNATOR | STRAIGHT THRU W/OFFSET | | TEST DATA DOCUMENT | 79318-110866 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | THREAD CLASS | 3A 1ST END | | THREAD DIRECTION | RIGHT-HAND 1ST END | | THREAD QUANTITY PER INCH | 12 1ST END | | THREAD SERIES DESIGNATOR | UN 1ST END |
|
|