|
|
|
National Stock Number:
4810-00-554-8132
Federal Supply Class:
4810
National Item Identification Number:
005548132
Description:
VALVE,SOLENOID
Detail:
A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see VALVE (1), LINEAR, DIRECTIONAL CONTROL. It may be inline or cartridge (manifold) design. Excludes VALVE (1), BUTTERFLY.
|
Manufacturer Information:
| AV2G1103 | 73760 | ITT AEROSPACE CONTROLS LLC | | NA5-6420-1 | 43999 | THE BOEING COMPANY | | NA5-6420-2 | 43999 | THE BOEING COMPANY | | V14500 | 96487 | VALCOR ENGINEERING CORPORATION |
|
Techincal Specification:
| CONNECTION STYLE | FLARE(TUBE) ALL ENDS | | CONNECTION TYPE | THREADED INTERNAL TUBE ALL ENDS | | CURRENT RATING IN AMPS | 1.200 | | FLOW CONTROL DEVICE NORMAL OPERATION POSITION | OPEN | | FLOW CONTROL DEVICE | PISTON | | MATERIAL | ALUMINUM ALLOY BODY | | MATERIAL | STEEL CORROSION RESISTING FLOW CONTROL DEVICE | | MAXIMUM OPERATING PRESSURE | 20.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 200.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE | | MOUNTING POSITION | HORIZONTAL | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES ALL ENDS | | NOMINAL THREAD SIZE | 0.750 INCHES ALL ENDS | | STYLE DESIGNATOR | STRAIGHT THRU | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE1 MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | ANODIZE | | TEST DATA DOCUMENT | 43999-NA5-6420-2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND ALL ENDS | | THREAD CLASS | 3B ALL ENDS | | THREAD SERIES DESIGNATOR | UNJF ALL ENDS | | VALVE OPERATION METHOD | SOLENOID | | VOLTAGE IN VOLTS AND CURRENT TYPE | 28.0 DC |
|
|