|
|
|
National Stock Number:
4730-00-554-8878
Federal Supply Class:
4730
National Item Identification Number:
005548878
Description:
ELBOW,TUBE TO BOSS
Detail:
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
|
Manufacturer Information:
| 16SW6 | 59257 | JM FITTINGS, LLC | | 71-16 | 99103 | FORMRITE TUBE CO |
|
Techincal Specification:
| CONNECTION STYLE | FLARED (TUBE) 1ST END | | CONNECTION STYLE | GASKET SEAL (BOSS) 2ND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION TYPE | THREADED INTERNAL BOSS 2ND END | | FLOW ANGLE | 90.0 DEGREES | | LEG LENGTH | 1.812 INCHES NOMINAL 1ST END | | LEG LENGTH | 2.000 INCHES NOMINAL 2ND END | | MATERIAL | STEEL OVERALL | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.000 INCHES 1ST END | | NOMINAL THREAD SIZE | 1.312 INCHES ALL ENDS | | SEAT ANGLE | 37.0 DEGREES 1ST END | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2A 1ST END | | THREAD CLASS | 2B 2ND END | | THREAD QUANTITY PER INCH | 12 ALL ENDS | | THREAD SERIES DESIGNATOR | UN ALL ENDS |
|
|