|
|
|
National Stock Number:
4730-00-455-8844
Federal Supply Class:
4730
National Item Identification Number:
004558844
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| 181602-050 | 24821 | ROSEMOUNT ANALYTICAL, INC. DIV PROCESS ANALYTICAL DIVISION | | 3D2807 | 11083 | CATERPILLAR INC | | 760-FS | 13174 | PARKER HANNIFIN CORP HOSE PRODUCTS DIV | | 760FS1-2 | 13174 | PARKER HANNIFIN CORP HOSE PRODUCTS DIV | | 760FS1-2 | 30327 | IMPERIAL | | 760-FS | 30327 | IMPERIAL |
|
Techincal Specification:
| CASEHARDENING INDICATOR | NOT CASEHARDENED | | FLANGE OUTSIDE DIAMETER | 0.682 INCHES NOMINAL | | FLANGE WIDTH | 0.098 INCHES NOMINAL | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 0.440 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66, COMP 1144 FED STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1144 | | SEAT ANGLE IN DEG | 10.0 | | SLEEVE OUTSIDE DIAMETER | 0.637 INCHES NOMINAL | | STYLE DESIGNATOR | FLARELESS | | SURFACE TREATMENT | PHOSPHATE |
|