|
|
|
National Stock Number:
4730-00-433-3179
Federal Supply Class:
4730
National Item Identification Number:
004333179
Description:
ELBOW,TUBE TO BOSS
Detail:
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
|
Manufacturer Information:
| 5515X8X6 | 01276 | EATON-AEROQUIP INC DIV FLUID CONNECTORS PRODUCTS | | 5515X8X6 | 79470 | DANA CORP WEATHERHEAD DIV | | C5515X8X6 | 01276 | EATON-AEROQUIP INC DIV FLUID CONNECTORS PRODUCTS | | 8-6 C5BX-S | 30780 | PARKER-HANNIFIN CORPORATION | | 8-6C5BX-S | 30780 | PARKER-HANNIFIN CORPORATION | | 8-6C5BX-S | 98441 | PARKER HANNIFIN CORP | | C5515X8X6 | 79470 | DANA CORP WEATHERHEAD DIV |
|
Techincal Specification:
| CONNECTION TYPE | THREADED EXTERNAL BOSS 2ND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION STYLE | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 2ND END | | CONNECTION STYLE | FLARED (TUBE) 1ST END | | FLOW ANGLE | 90.0 DEGREES | | LEG LENGTH | 1.250 INCHES NOMINAL 1ST END | | LEG LENGTH | 1.320 INCHES NOMINAL 2ND END | | MATERIAL | STEEL STAINLESS - USE STB000 OVERALL | | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | 400.0 FAHRENHEIT SINGLE RESPONSE | | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.562 INCHES 2ND END | | NOMINAL THREAD SIZE | 0.750 INCHES 1ST END | | SEAT ANGLE | 37.0 DEGREES 1ST END | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 2A ALL ENDS | | THREAD SERIES DESIGNATOR | UNF ALL ENDS |
|
|