| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY ALL ENDS |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| BOLT HOLE DIAMETER | 0.343 INCHES NOMINAL 2ND END |
| BOLT CIRCLE DIAMETER | 2.312 INCHES NOMINAL 2ND END |
| BOLT HOLE QUANTITY | 3 1ST END |
| BOLT HOLE QUANTITY | 4 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | RAISED 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZE 1ST END |
| FLANGE STYLE | ROUND W / BOLT HOLES 2ND END |
| HYDROSTATIC TEST PRESSURE | 1600.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED COTTON CORD AND OUTER LAYER BRAIDED ASBESTOS CORD |
| OUTSIDE DIAMETER | 1.234 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 21.500 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| TEMP RATING | -40.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |