| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 75.8 |
| BOLT HOLE DIAMETER | 0.250 INCHES NOMINAL 2ND END |
| BOLT HOLE QUANTITY | 4 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.000 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.000 INCHES NOMINAL 2ND END |
| CONNECTION STYLE | FLARE 1ST END |
| CONNECTION STYLE | PLAIN 2ND END |
| CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE LENGTH | 1.420 INCHES MINIMUM AND 1.460 INCHES MAXIMUM 2ND END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 2ND END |
| FLANGE THICKNESS | 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM 2ND END |
| FLOW ANGLE | 14.2 DEGREES 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| FLANGE WIDTH | 1.420 INCHES MINIMUM AND 1.460 INCHES MAXIMUM 2ND END |
| HYDROSTATIC TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| INNER CONVEYING TUBE STYLE | HELICAL CLOSE-PITCH CORRUGATED |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.703 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 4.600 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 6.000 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD QUANTITY PER INCH | 18 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |