| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| HYDROSTATIC TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.430 INCHES MINIMUM AND 0.462 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER RUBBER IMPREGNATED COTTON FABRIC AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER RUBBER IMPREGNATED COTTON FABRIC AND 4TH LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER |
| OUTSIDE DIAMETER | 0.828 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 21.500 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.750 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | 96906-MS28759 GOVERNMENT STANDARD |
| TEMP RATING | -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |