| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| BURST TEST PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | PLAIN 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL HOSE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 100.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER RUBBER IMPREGNATED FABRIC AND 1ST LAYER HELIX CORROSION RESISTANT STEEL COIL AND OUTER LAYER MOLDED RUBBER, ETHYLENE PROPYLENE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 300.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| MEDIA FOR WHICH DESIGNED | WATER, FRESH SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 1.000 INCHES 2ND END |
| NOMINAL THREAD SIZE | 1.000 INCHES 1ST END |
| NONDEFINITIVE SPEC/STD DATA | A GRADE AND 2 CLASS AND A STYLE |
| SPECIAL FEATURES | COUPLINGS ATTACHED WITH CLAMPS,FEMALE COUPLING SUPPLIED WITH RUBBER WASHER |
| SPECIFICATION/STANDARD DATA | 81348-ZZ-H-561 GOVERNMENT SPECIFICATION |
| TEMP RATING | 212.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | NPSH 1ST END |
| THREAD SERIES DESIGNATOR | NPSH 2ND END |