| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE COPPER ALLOY ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | NUT STEEL 1ST END |
| END FITTING COMPONENT AND MATERIAL | SOCKET STEEL 2ND END |
| BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | INVERTED FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | INTERNAL SUPPORT AND REUSABLE END FITTINGS |
| FITTING COMPONENT AND SURFACE TREATMENT | NUT CADMIUM 1ST END |
| FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE COPPER ALLOY ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | SOCKET CADMIUM 2ND END |
| HYDROSTATIC TEST PRESSURE | 1600.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.641 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| OUTSIDE DIAMETER | 0.766 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 36.000 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 7.750 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| SEAT ANGLE | 30.0 DEGREES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| TEMP RATING | -100.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD SERIES DESIGNATOR | NPTF 2ND END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| VACUUM IN TORR | 50.8 |