| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| BURST TEST PRESSURE | 1600.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, INVERTED FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, CHLOROPRENE AND 1ST LAYER BRAIDED FIBER |
| OUTSIDE DIAMETER | 0.422 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 400.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 41.000 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 2.250 INCHES |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.438 INCHES 2ND END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND GREASE RESISTANT AND LIGHT RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| SEAT ANGLE | 45.0 DEGREES 1ST END |
| SEAT ANGLE | 45.0 DEGREES 2ND END |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD CLASS | 1A 2ND END |
| THREAD CLASS | 3B 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD SERIES DESIGNATOR | UNS 2ND END |
| THREAD QUANTITY PER INCH | 24 2ND END |