|
|
|
National Stock Number:
4330-00-499-3281
Federal Supply Class:
4330
National Item Identification Number:
004993281
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 00758PCK | 14448 | HAMMOND VALVE CORP | | 1K2195 | 22508 | FISHER CONTROLS CO INC | | 2523 | 21444 | REXNORD INDUSTRIES LLC | | 2523 | 22508 | FISHER CONTROLS CO INC | | 1K2195000A2 | 22508 | FISHER CONTROLS CO INC | | 3277635 | 55380 | HATCH & KIRK, INC. | | 800513 | 21444 | REXNORD INDUSTRIES LLC | | 800758L | 21444 | REXNORD INDUSTRIES LLC | | 800758PC800758L | 21444 | REXNORD INDUSTRIES LLC | | BA1283-3 | 21444 | REXNORD INDUSTRIES LLC | | BA1283-3 | 22508 | FISHER CONTROLS CO INC | | BA1283-3F0R361 1-2 | 22508 | FISHER CONTROLS CO INC | | 3371232 | 55380 | HATCH & KIRK, INC. | | 3371232 | 72915 | GENERAL MOTORS CORP ELECTRO-MOTIVE DIV |
|
Techincal Specification:
| BODY DIAMETER | 3.250 INCHES NOMINAL | | BODY INSIDE DIAMETER | 3.031 INCHES NOMINAL | | BODY OVERALL LENGTH | 4.937 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | FILTERING MEDIA DESIGN | BLOCK SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | PARALLEL | | MATERIAL | COPPER ALLOY CONTAINER/CARTRIDGE | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | SPECIAL FEATURES | 8 HOLES LOCATED IN THE CENTER WALL OF FILTER 0.250 IN. DIA,1.250 IN. CENTER TO CENTER,2 HOLES @LOCATED IN THE WALL 0.937 IN. FROM TOP 0.250 IN. DIA 180 DEGREE APART | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
|
|