|
|
|
National Stock Number:
4330-00-451-1283
Federal Supply Class:
4330
National Item Identification Number:
004511283
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 63477-03-10MICR0N | 05228 | PTI TECHNOLOGIES INC. | | 7515180 | 05228 | PTI TECHNOLOGIES INC. | | S5180 | 3U011 | SWIFT FILTERS, INC. | | 7515180 | 64829 | ARVINMERITOR INC |
|
Techincal Specification:
| BODY DIAMETER | 2.020 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.255 INCHES MINIMUM AND 1.260 INCHES MAXIMUM | | BODY OVERALL LENGTH | 7.000 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 4500.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE AND 10.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | METAL FILTERING MEDIUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/CLOSED ENDS | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
|
|