|
|
|
National Stock Number:
3930-00-503-0340
Federal Supply Class:
3930
National Item Identification Number:
005030340
Description:
TRUCK,LIFT,FORK
Detail:
A SELF-PROPELLED, WHEELED VEHICLE, EQUIPPED WITH POWER DRIVEN FRONT OR SIDE LOADING FORK, TYPE ELEVATING UNIT(S). THE ELEVATING UNIT(S) MAY EXTEND AND RETRACT TO PROVIDE A REACHING CAPABILITY. IT IS PRIMARILY USED FOR LIFTING, TRANSPORTING, AND STACKING. FOR NONSELF-PROPELLED, WHEELED VEHICLES EQUIPPED WITH EITHER MANUAL OR POWER DRIVEN ELEVATING UNIT(S), SEE ELEVATOR, PORTABLE AND TRUCK, LIFT, HAND. EXCLUDES TRUCK, LIFT, PLATFORM.
|
Manufacturer Information:
| H520B | 04627 | HYSTER-YALE GROUP, INC. | | H520B | 30076 | HYSTER-YALE GROUP, INC. | | MILT52741 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| STEERING TYPE | CRABBING | | VEHICULAR TURN RADIUS | 259.000 INCHES NOMINAL | | FORK/PLATFORM MAXIMUM FREE LIFT HEIGHT | 6.000 INCHES | | MAXIMUM LOAD RATING | 50000.000 POUNDS | | TRANSMISSION TYPE | AUTOMATIC | | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | U.L. TYPE D | | PRIME MOVER TYPE | DIESEL ENGINE | | WHEEL TYPE AND QUANTITY | 2 DUAL PNEUMATIC DRIVE WHEEL | | 2 DUAL PNEUMATIC STEERABLE WHEEL | | PRIME MOVER MANUFACTURER CODE AND MODEL NUMBER | 72582-6V-53WX | | STYLE DESIGNATOR | CONVENTIONAL | | OVERALL WIDTH | 132.000 INCHES NOMINAL | | FORK LENGTH | 96.000 INCHES NOMINAL | | FORK WIDTH | 14.000 INCHES NOMINAL | | OVERALL HEIGHT WITH FORKS IN LOWEST POSITION | 224.000 INCHES NOMINAL | | OVERALL HEIGHT WITH FORKS IN HIGHEST POSITION | 356.000 INCHES NOMINAL | | OVERALL LENGTH WITHOUT FORKS | 278.000 INCHES NOMINAL | | LIFT HEIGHT OF FORKS | 264.000 INCHES MAXIMUM | | BOOM FORWARD TILT ANGLE | 2.5 DEGREES NOMINAL | | BOOM BACKWARD TILT ANGLE | 10.0 DEGREES NOMINAL | | FEATURES PROVIDED | NONTACTICAL ELECTROMAGNETIC INTERFERENCE SUPPRESSION | | SPECIAL FEATURES | ADAPTATION FORHANDLING 20 AND 40 FOOT TRANSPORT CONTAINERS THROUGH THE USE OF A CONTAINERHANDLING DEVICE THAT REPLACES THE FORKS ON THE UPRIGHT CARRIAGE | | FORK LOAD CENTER DISTANCE | 48.000 INCHES MAXIMUM | | FORK SPREAD DISTANCE | 63.000 INCHES MINIMUM AND | | 120.000 INCHES MAXIMUM | | STORAGE AISLE MINIMUM WIDTH | 399.000 INCHES | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILT52741 | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 04627 | | DESIGN CONTROL REFERENCE | H520B |
|
|