|
|
|
National Stock Number:
3405-00-528-8688
Federal Supply Class:
3405
National Item Identification Number:
005288688
Description:
SAW,BAND,METAL CUTTING
Detail:
A VAIRABLE SPEED SAW, BASICALLY DESIGNED TO CUT AND/OR FILE METAL, USING A BAND SAW BLADE AND/OR A BAND FILE THAT IS REVOLVED OR ROTATED AROUND A DRIVER AND IDLER WHEEL(S). THE TEETH FORM A VERTICAL LINE WHILE PASSING THROUGH THE WORK. IT IS EQUIPPED WITH A FIXED OR TILTING HORIZONTAL TABLE FOR MOUNTING THE WORK. THE WORK TABLE AND/OR SAW FRAME MAY BE CAPABLE OF TILTING AS A UNIT TO PERMIT ANGLE CUTTING. IT MAY BE PROVIDED WITH SUFFICIENT CUTTING SPEEDS TO ALLOW FOR WOOD AND/OR OTHER MATERIAL CUTTING. EXCLUDES SAW (3), BAND, CUTOFF.
|
Manufacturer Information:
| 2012-2H | 18056 | DOALL BALTIMORE COMPANY | | ML | 14320 | CONTINENTAL MACHINES INC | | ML | 18056 | DOALL BALTIMORE COMPANY |
|
Techincal Specification:
| DRIVE METHOD | ELECTRIC MOTOR | | HORSEPOWER RATING | 3.000 | | CURRENT TYPE | DC | | VOLTAGE RATING | 200.0 VOLTS MINIMUM AND | | 575.0 VOLTS MAXIMUM | | ELECTRIC MOTOR QUANTITY | 1 | | ROTATIONAL SPEED RATING IN RPM | 5200.0 | | MOUNTING TYPE | FLOOR | | TABLE LENGTH | 33.500 INCHES NOMINAL | | TABLE WIDTH | 26.500 INCHES NOMINAL | | TABLE TYPE | TILTING | | TABLE RIGHT TILT ANGLE IN DEG | 45.0 | | TABLE LEFT TILT ANGLE IN DEG | 10.0 | | BAND TYPE FOR WHICH DESIGNED | SAW BLADE | | BLADE MAXIMUM LENGTH ACCOMMODATED | 154.000 INCHES | | BLADE MAXIMUM WIDTH ACCOMMODATED | 1.000 INCHES | | FRAME TYPE | RIGID | | VISE | NOT PROVIDED | | THROAT DEPTH | 20.000 INCHES NOMINAL | | DISTANCE BETWEEN GUIDE AND TABLE | 12.000 INCHES NOMINAL | | CUTTING SPEED RANGE | 5.0 TO 5200.0 FEET PER MINUTE | | CUTTING SPEED QUANTITY | 2 | | POWER FEED FEATURE | PROVIDED | | FEED METHOD | CUTTING BAND INTO WORK | | BRAKING FACILITY | INCLUDED | | BRAKING DEVICE TYPE | NONAUTOMATIC | | BUILT-IN COOLANT SYSTEM | INCLUDED | | INTEGRAL BUTT WELDER | INCLUDED | | INTEGRAL GRINDER | INCLUDED | | ACCESSORY COMPONENTS AND QUANTITY | SET OF SAW GUIDE BLOCKS W/CARBIDE BACKUP AND SAW GUIDE INSERTS,1;AIR COMPRESSOR,1;CHIP DRAWER,1;WORKLIGHT,1 | | SPECIAL FEATURES | AVAILABLE VOLT RATING 200/208/230/460/575;BLADE ACCOM 1/16 TO 1 IN.;TWO CUTTING SPEED RANGES-LOW 5 TO 300 FPM HIGH 850 TO 5200 FPM;FEED METHOD CAN BE CUTTING BAND INTO WORK AND WORK INTO CUTTING BAND |
|
|