| ALIGNMENT TYPE | RIGID |
| ASSEMBLY OVERALL LENGTH | 3.6250 INCHES NOMINAL |
| BASE THICKNESS | 0.4375 INCHES NOMINAL |
| BASE LENGTH | 2.7500 INCHES NOMINAL |
| BLOCK TYPE | FIXED |
| BORE DIAMETER | 1.2500 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.8650 INCHES MINIMUM AND 1.8850 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 2.9900 INCHES MINIMUM AND 3.0100 INCHES MAXIMUM |
| FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.7450 INCHES MINIMUM AND 1.7550 INCHES MAXIMUM |
| HOUSING HEIGHT | 3.2500 INCHES NOMINAL |
| HOUSING WIDTH | 4.0000 INCHES NOMINAL |
| INTERNAL FIT-UP DESIGNATION | STANDARD |
| LOAD CAPABILITY TYPE | RADIAL |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MATERIAL | IRON CAST HOUSING |
| MATERIAL | RUBBER SYNTHETIC SEAL |
| MATERIAL | STEEL COMP E52100 BALL |
| MOUNTING HOLE DIAMETER | 0.3438 INCHES NOMINAL |
| MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| SEAL LOCATION | BOTH ENDS |
| SEAL TYPE | CONTACT |
| SHAFT END TYPE | OPEN |