3120-00-738-5890, BEARING,SLEEVE

National Stock Number:
3120-00-738-5890

Federal Supply Class:
3120

National Item Identification Number:
007385890

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.

Manufacturer Information:

SGT227-1	59211	PARKER-HANNIFIN CORPORATION
SGT227-1	82106	PARKER-HANNIFIN CORPORATION
SGT227-1	92003	PARKER HANNIFIN CORPORATION DIV AEROSPACE GROUP HEADQUARTERS

Techincal Specification:

MATERIAL	STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM INSIDE DIAMETER SURFACE OF BODY
	CADMIUM LEFT END SURFACE OF BODY AND FLANGE
	CHROMIUM OUTSIDE DIAMETER SURFACE OF BODY
	CADMIUM OUTSIDE DIAMETER SURFACE OF FLANGE
	CADMIUM RIGHT END SURFACE OF BODY
	CADMIUM RIGHT END SURFACE OF LEFT FLANGE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE INSIDE DIAMETER SURFACE OF BODY
	QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE
	QQ-C-320 FED SPEC 1ST TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
	QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
	QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE RIGHT END SURFACE OF BODY
	QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE
STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
OVERALL LENGTH	0.4900 INCHES MINIMUM AND
	0.5100 INCHES MAXIMUM
BODY OUTSIDE DIAMETER	0.4986 INCHES MINIMUM AND
	0.4991 INCHES MAXIMUM
BODY INSIDE DIAMETER	0.3755 INCHES MINIMUM
FLANGE OUTSIDE DIAMETER	0.7400 INCHES MINIMUM AND
	0.7600 INCHES MAXIMUM
FLANGE WIDTH	0.0380 INCHES MINIMUM AND
	0.0400 INCHES MAXIMUM
CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER
	SQUARE OUTSIDE RIGHT CORNER
	SQUARE INSIDE RIGHT CORNER
	SQUARE INSIDE LEFT CORNER
	SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
	ROUND LEFT FLANGE BODY CORNER
ANTIROTATION/LUBRICATION TYPE AND QUANTITY	4 HOLE
HOLE DIAMETER	0.0458 INCHES MINIMUM AND
	0.0508 INCHES MAXIMUM FIRST
SURFACE FINISH	125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
	125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
	16.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
	125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
	125.0 MICROINCHES RIGHT END SURFACE OF BODY
	125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
LUBRICANT ACCOMMODATION STYLE	GROOVED CIRCULAR
SURFACE GROOVE LOCATION AND QUANTITY	1 EXTERNAL
TEST DATA DOCUMENT	81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
THE MANUFACTURERS DATA
MANUFACTURERS CODE	82106
DESIGN CONTROL REFERENCE	SGT227-1

Click here to Register for Free 30-day Trial