|
|
|
National Stock Number:
3120-00-541-9559
Federal Supply Class:
3120
National Item Identification Number:
005419559
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 02-11086 | 73030 | HAMILTON SUNDSTRAND CORPORATION | | 02-11086 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| DIAMETER | 0.4555 INCHES MINIMUM AND 0.4560 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.9990 INCHES MINIMUM AND 0.9995 INCHES MAXIMUM | | OVERALL THICKNESS | 0.1880 INCHES MINIMUM AND 0.1890 INCHES MAXIMUM | | STYLE DESIGNATOR | ROUND |
|
|