|
|
|
National Stock Number:
3120-00-516-9586
Federal Supply Class:
3120
National Item Identification Number:
005169586
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 1561931 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 1561931 | 12934 | NAVAL AIR WARFARE CENTER WEAPONS DIV | | 34479-34 | 15472 | SOLVENTUM PURIFICATION INC. | | 415684-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 | | 52B6584-1 | 21439 | CURTISS-WRIGHT FLOW CONTROL SERVICE, LLC | | 52B6584-1 | D2638 | EME ELEKTRO-METALL EXPORT GMBH | | 70004-251 | 21439 | CURTISS-WRIGHT FLOW CONTROL SERVICE, LLC | | EW163202 | 4T3X6 | BUNTING BEARINGS LLC | | EW163202 | 60960 | BUNTING BEARINGS CORP KALAMAZOO PLANT | | EW163202 | 71366 | BUNTING BEARINGS CORP | | ST36D39-4 | 04236 | LOCKHEED MARTIN CORP | | TB1632 | 71041 | ALTRA INDUSTRIAL MOTION CORP. | | TW102 | 60960 | BUNTING BEARINGS CORP KALAMAZOO PLANT | | TW102 | 71366 | BUNTING BEARINGS CORP |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 1.9950 INCHES MINIMUM AND | | 2.0050 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR | | OVERALL THICKNESS | 0.1225 INCHES MINIMUM AND | | 0.1275 INCHES MAXIMUM | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 1.0145 INCHES MINIMUM AND | | 1.0175 INCHES MAXIMUM | | LUBRICATION MATERIAL | LUBRICANT, MANUFACTURERS STANDARD |
|
|