|
|
|
National Stock Number:
3120-00-516-1314
Federal Supply Class:
3120
National Item Identification Number:
005161314
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 6709768 | 24617 | GENERAL MOTORS CORP | | 6709768 | 63005 | ROLLS-ROYCE CORPORATION | | 6709768 | 73342 | ALLISON TRANSMISSION INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 8735 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | STYLE DESIGNATOR | ROUND | | OUTSIDE DIAMETER | 2.0000 INCHES NOMINAL | | CORNER SHAPE | SQUARE FIRST OUTSIDE CORNER | | SQUARE FIRST INSIDE CORNER | | SQUARE SECOND INSIDE CORNER | | CROSS-SECTIONAL SHAPE STYLE | TAPERED SIDE | | OVERALL THICKNESS | 0.2480 INCHES MINIMUM AND | | 0.2520 INCHES MAXIMUM | | SPHERICAL DEPTH | 0.1250 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND | | DIAMETER | 1.1250 INCHES MINIMUM AND | | 1.1350 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES LEFT SIDE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 63005 | | DESIGN CONTROL REFERENCE | 6709768 |
|
|