5360-00-516-1134 SPRING,HELICAL,COMPRESSION Index 3120-00-516-1141 BUSHING,SLEEVE

National Stock Number:
3120-00-516-1139

Federal Supply Class:
3120

National Item Identification Number:
005161139

Description:
BUSHING,SLEEVE

Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.


Manufacturer Information:
47-267-141-197499BELL TEXTRON INC


Techincal Specification:
BODY INSIDE DIAMETER0.1871 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM
BODY OUTSIDE DIAMETER0.3135 INCHES MINIMUM AND 0.3140 INCHES MAXIMUM
CORNER SHAPECHAMFERED OUTSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPEUNDERCUT LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER0.4270 INCHES MINIMUM AND 0.4470 INCHES MAXIMUM
FLANGE WIDTH0.1780 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM
OVERALL LENGTH0.3480 INCHES MINIMUM AND 0.3580 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626,COND C4 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6758,C4 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 4140 OR STEEL COMP 4130 OVERALL
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH63.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
TEST DATA DOCUMENT81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us