3120-00-516-0367 BEARING,SLEEVE Index 5365-00-516-0379 SPACER,SLEEVE

National Stock Number:
3120-00-516-0375

Federal Supply Class:
3120

National Item Identification Number:
005160375

Description:
BEARING,WASHER,THRUST

Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.


Manufacturer Information:
20-32391-376301THE BOEING COMPANY


Techincal Specification:
CENTER HOLE SHAPE STYLEROUND
CORNER SHAPECHAMFERED FIRST INSIDE CORNER
CORNER SHAPESQUARE FIRST OUTSIDE CORNER
CORNER SHAPESQUARE FOURTH OUTSIDE CORNER
CORNER SHAPESQUARE SECOND INSIDE CORNER
CORNER SHAPESQUARE SECOND OUTSIDE CORNER
CORNER SHAPESQUARE THIRD OUTSIDE CORNER
CROSS-SECTIONAL SHAPE STYLESHOULDERED
DIAMETER2.3690 INCHES MINIMUM AND 2.3710 INCHES MAXIMUM
FLANGE THICKNESS0.0620 INCHES NOMINAL
OUTSIDE DIAMETER2.8500 INCHES MINIMUM AND 2.8700 INCHES MAXIMUM
OVERALL THICKNESS0.5300 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4640 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY 630 OVERALL
SHANK OUTSIDE DIAMETER2.5615 INCHES MINIMUM AND 2.5625 INCHES MAXIMUM
SPECIAL FEATURESINTERNAL GROOVE/S/
STYLE DESIGNATORROUND
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES LEFT SIDE
SURFACE FINISH125.0 MICROINCHES LARGEST OUTSIDE DIAMETER
SURFACE FINISH125.0 MICROINCHES SMALLEST OUTSIDE DIAMETER
SURFACE FINISH125.0 MICROINCHES RIGHT SIDE
SURFACE FINISH125.0 MICROINCHES RIGHT SIDE OF FLANGE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OR CADMIUM AND CHROMATE OR CADMIUM AND PHOSPHATE OVERALL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us