5995-00-514-8650 CABLE ASSEMBLY,SPECIAL PURPOSE,E Index 5307-00-514-8652 STUD,PLAIN

National Stock Number:
3120-00-514-8651

Federal Supply Class:
3120

National Item Identification Number:
005148651

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
07-382-12A01209455RBC TRANSPORT DYNAMICS CORP
10107644A486GNIMIKKEISTOKESKUS NCB FINLAND
119-00-12-01277896REXNORD INDUSTRIES, LLC
123-0212A01277896REXNORD INDUSTRIES, LLC
91087-12A01209455RBC TRANSPORT DYNAMICS CORP
ADLF12A01215860NEW HAMPSHIRE BALL BEARINGS INC
AHJF12A01250294NEW HAMPSHIRE BALL BEARINGS INC
AS81934/281343SOCIETY OF AUTOMOTIVE ENGINEERS INC
ATTF12A01215860NEW HAMPSHIRE BALL BEARINGS INC
FBJW24TF-12A01221335TIMKEN CO
FBJW24TF12WM21335TIMKEN CO
FBJW24TF12WM3NPS1RBC AIRCRAFT PRODUCTS, INC.
FBRR-12A01273134ROLLER BEARING COMPANY OF AMERICA, INC.
KDJ12A01297613SARGENT AEROSPACE & DEFENSE, LLC
KDJ12A012-34297613SARGENT AEROSPACE & DEFENSE, LLC
KRJ12HDYB-12A012M50632KAMATICS CORPORATION
M81934/2-12A01281343SOCIETY OF AUTOMOTIVE ENGINEERS INC
M81934/2-12A01281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-B-8193481349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS21241-12A01296906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
NHLF12A01215860NEW HAMPSHIRE BALL BEARINGS INC
SAE AS81934/281343SOCIETY OF AUTOMOTIVE ENGINEERS INC
ST4M127-12A01276301THE BOEING COMPANY


Techincal Specification:
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
ALUMINUM ALLOY 2024 OUTER LAYER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/3,T8511 FED SPEC SINGLE MATERIAL RESPONSE OR
QQ-A-225/6,T851 FED SPEC SINGLE MATERIAL RESPONSE OUTER LAYER
SURFACE TREATMENTANODIZE OR
CHROMATE OUTER LAYER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OR
MIL-A-8625 TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE OR
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OUTER LAYER
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
OVERALL LENGTH0.4225 INCHES MINIMUM AND
0.4375 INCHES MAXIMUM
BODY OUTSIDE DIAMETER0.9388 INCHES MINIMUM AND
0.9398 INCHES MAXIMUM
BODY INSIDE DIAMETER0.7505 INCHES MINIMUM AND
0.7515 INCHES MAXIMUM
FLANGE OUTSIDE DIAMETER1.4800 INCHES MINIMUM AND
1.5000 INCHES MAXIMUM
FLANGE WIDTH0.0575 INCHES MINIMUM AND
0.0625 INCHES MAXIMUM
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
SQUARE OUTSIDE RIGHT CORNER
SQUARE INSIDE RIGHT CORNER
SQUARE INSIDE LEFT CORNER
SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
UNDERCUT LEFT FLANGE BODY CORNER
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
125.0 MICROINCHES RIGHT END SURFACE OF BODY
125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SPECIAL FEATURESPLASTIC,POLYTETRAFLUOROETHYLENE LINER BONDED TO LEFT END SURFACE OF FLANGE


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us