5305-00-510-6718 SCREW,MACHINE Index 5315-00-510-6737 PIN,STRAIGHT,HEADLESS

National Stock Number:
3120-00-510-6719

Federal Supply Class:
3120

National Item Identification Number:
005106719

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
ADLF32A1415860NEW HAMPSHIRE BALL BEARINGS INC
ATLF32A1415860NEW HAMPSHIRE BALL BEARINGS INC
FBE32A1473134ROLLER BEARING COMPANY OF AMERICA, INC.
FBE32A14B73134ROLLER BEARING COMPANY OF AMERICA, INC.
KJN32A014-14197613SARGENT AEROSPACE & DEFENSE, LLC


Techincal Specification:
BODY INSIDE DIAMETER2.0005 INCHES MINIMUM AND 2.0015 INCHES MAXIMUM
BODY OUTSIDE DIAMETER2.2518 INCHES MINIMUM AND 2.2523 INCHES MAXIMUM
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPEUNDERCUT LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER2.7300 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM
FLANGE WIDTH0.0887 INCHES MINIMUM AND 0.0937 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/11,ALLOY 7075,T6 FED SPEC 1ST MATERIAL RESPONSE OUTER LAYER
MATERIALALUMINUM ALLOY 7075 OUTER LAYER
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
SPECIAL FEATURESPLASTIC LINER BONDED TO LEFT END SURFACE OF FLANGE
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH125.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OUTER LAYER
SURFACE TREATMENTANODIZE OUTER LAYER


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us