|
|
|
National Stock Number:
3120-00-502-0715
Federal Supply Class:
3120
National Item Identification Number:
005020715
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| AREP5SS3FN | 57448 | STEPHENS-ADAMSON INC A SUB OF ALLIS-CHALMERS CORP | | ARY5-16SSAFNW | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | ARY5E103 | 50294 | NEW HAMPSHIRE BALL BEARINGS INC | | BRES5385LG3 | 81376 | RBC SOUTHWEST PRODUCTS, INC. | | KBE5-67AFNW | 97613 | SARGENT AEROSPACE & DEFENSE, LLC |
|
Techincal Specification:
| BORE DIAMETER | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM | | BORE CENTER TO SHANK END DISTANCE | 1.8750 INCHES NOMINAL | | FEATURES PROVIDED | FLUSH LUBRICATION FITTING | | INNER MEMBER WIDTH | 0.6200 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM | | OUTER MEMBER OUTSIDE DIAMETER | 0.8750 INCHES NOMINAL | | OUTER MEMBER WIDTH | 0.2600 INCHES MINIMUM AND 0.2700 INCHES MAXIMUM | | OVERALL LENGTH | 2.3125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE LUBRICATION | | MATERIAL | GREASE LUBRICATION | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.0310 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM | | SPECIAL FEATURES | NAS KEYWAY IN SHANK,0.0020 IN. MAX RADIAL CLEARANCE | | STATIC RADIAL LOAD RATING | 3570 POUNDS | | STYLE DESIGNATOR | BALL TYPE | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIAMETER | 0.312 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 3A | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNF |
|
|