|
|
|
National Stock Number:
3120-00-492-7466
Federal Supply Class:
3120
National Item Identification Number:
004927466
Description:
BUSHING,SLEEVE
Detail:
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG.
|
Manufacturer Information:
| 135B6428-1 | 05606 | GENERAL DYNAMICS-OTS, INC. |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 0.6250 INCHES MINIMUM AND 0.6260 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 0.9382 INCHES MINIMUM AND 0.9386 INCHES MAXIMUM | | CORNER SHAPE | SQUARE ALL CORNERS | | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL | | OVERALL LENGTH | 0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4140 OVERALL | | STYLE DESIGNATOR | SOLID, PLAIN, NO OUTSIDE FLANGES | | SURFACE FINISH | 125.0 MICROINCHES LEFT END SURFACE OF BODY | | SURFACE FINISH | 125.0 MICROINCHES RIGHT END SURFACE OF BODY | | SURFACE FINISH | 32.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY | | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY | | SURFACE TREATMENT | PHOSPHATE OVERALL | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|