5310-00-478-2742 NUT,PLAIN,CASTELLATED,HEXAGON Index 5325-00-478-2745 RING,RETAINING

National Stock Number:
3120-00-478-2743

Federal Supply Class:
3120

National Item Identification Number:
004782743

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
257873006848HONEYWELL INTERNATIONAL INC
2578730-001A06848HONEYWELL INTERNATIONAL INC
2578730-001A13002GOODRICH CORPORATION
2578730-001A17576GOODRICH CORP DBA GOODRICH CORP
2578730-001A55284HONEYWELL INTERNATIONAL INC.
2578730-001A6K4C8GOODRICH CORPORATION


Techincal Specification:
BODY INSIDE DIAMETER0.6880 INCHES MINIMUM AND 0.6890 INCHES MAXIMUM
BODY OUTSIDE DIAMETER0.8135 INCHES MINIMUM AND 0.8140 INCHES MAXIMUM
CORNER SHAPECHAMFERED INSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER1.0600 INCHES NOMINAL
FLANGE WIDTH0.0480 INCHES MINIMUM AND 0.0500 INCHES MAXIMUM
OVERALL LENGTH0.3080 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONQ-A-200/11 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/9 FED SPEC 2ND MATERIAL RESPONSE OUTER LAYER
MATERIALALUMINUM ALLOY 7075 OUTER LAYER
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE INNER LAYER
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY AND FLANGE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE RIGHT END SURFACE OF BODY AND FLANGE
SURFACE TREATMENTANODIZE LEFT END SURFACE OF BODY AND FLANGE
SURFACE TREATMENTANODIZE OUTSIDE DIAMETER SURFACE OF BODY
SURFACE TREATMENTANODIZE OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE TREATMENTANODIZE RIGHT END SURFACE OF BODY
SURFACE TREATMENTANODIZE RIGHT END SURFACE OF BODY AND FLANGE
TEST DATA DOCUMENT81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us