3120-00-474-3203 BEARING,SLEEVE Index 4320-00-474-3206 CYLINDER BLOCK,HYDRAULIC MOTOR-P

National Stock Number:
3120-00-474-3204

Federal Supply Class:
3120

National Item Identification Number:
004743204

Description:
BEARING,SLEEVE

Detail:
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW.


Manufacturer Information:
3127600198PRATT & WHITNEY CANADA CORP
3127677445RTX CORPORATION


Techincal Specification:
ANTIROTATION/LUBRICATION TYPE AND QUANTITY2 HOLE AND 1 SLOT
BODY INSIDE DIAMETER0.8640 INCHES MINIMUM AND 0.8660 INCHES MAXIMUM
BODY OUTSIDE DIAMETER1.0640 INCHES MINIMUM AND 1.0650 INCHES MAXIMUM
CORNER SHAPECHAMFERED INSIDE LEFT CORNER
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
FLANGE OUTSIDE DIAMETER1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM
FLANGE WIDTH0.0610 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
HOLE DIAMETER0.1780 INCHES MINIMUM AND 0.1980 INCHES MAXIMUM FIRST
LUBRICANT ACCOMMODATION STYLEGROOVED CIRCULAR
OVERALL LENGTH1.5990 INCHES MINIMUM AND 1.6190 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 4846 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY OVERALL
MATERIALOIL LUBRICATING LUBRICATION
SLOT LENGTH0.0520 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM FIRST
SLOT WIDTH0.1150 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM FIRST
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
SURFACE FINISH63.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
SURFACE FINISH63.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH63.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
SURFACE GROOVE LOCATION AND QUANTITY1 INTERNAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us