|
|
|
National Stock Number:
3120-00-470-3260
Federal Supply Class:
3120
National Item Identification Number:
004703260
Description:
BEARING,PLAIN,ROD END
Detail:
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING.
|
Manufacturer Information:
| 177150-4 | 09455 | RBC TRANSPORT DYNAMICS CORP | | ADNE4-6 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | ATNE4-6 | 15860 | NEW HAMPSHIRE BALL BEARINGS INC | | ART4E-6-20 | 50294 | NEW HAMPSHIRE BALL BEARINGS INC | | DREM4-337-1 | 81376 | RBC SOUTHWEST PRODUCTS, INC. | | C361-4-6 | 81755 | LOCKHEED MARTIN CORPORATION | | MKR4DK | 73134 | ROLLER BEARING COMPANY OF AMERICA, INC. |
|
Techincal Specification:
| BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM | | BORE CENTER TO SHANK END DISTANCE | 1.7200 INCHES MINIMUM AND 1.7400 INCHES MAXIMUM | | INNER MEMBER WIDTH | 0.3750 INCHES MINIMUM AND 0.3800 INCHES MAXIMUM | | OUTER MEMBER OUTSIDE DIAMETER | 0.7450 INCHES MINIMUM AND 0.7850 INCHES MAXIMUM | | OUTER MEMBER WIDTH | 0.2760 INCHES MINIMUM AND 0.2860 INCHES MAXIMUM | | OVERALL LENGTH | 2.1120 INCHES NOMINAL | | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER | | MATERIAL | STEEL COMP 440C INNER MEMBER | | MATERIAL | STEEL COMP 630 INTERNAL ROD END BODY | | SHANK STYLE | EXTERNALLY THREADED | | SHANK THREAD LENGTH | 1.0000 INCHES NOMINAL | | SPECIAL FEATURES | NAS 559 KEYWAY IN SHANK | | STATIC RADIAL LOAD RATING | 4270 POUNDS | | STYLE DESIGNATOR | BALL TYPE | | SURFACE TREATMENT | CADMIUM ROD END BODY | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3A | | THREAD DIAMETER | 0.250 INCHES NOMINAL | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNF | | THREAD QUANTITY PER INCH | 28 |
|
|