|
|
|
National Stock Number:
3120-00-448-0592
Federal Supply Class:
3120
National Item Identification Number:
004480592
Description:
BEARING,WASHER,THRUST
Detail:
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE.
|
Manufacturer Information:
| 07-857691 | 16662 | LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE | | 07-857691 | 66654 | TVH PARTS CO. | | 857691 | 12603 | CLARK EQUIPMENT CO | | 857691 | 16662 | LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE | | 857691 | 66654 | TVH PARTS CO. | | 3H1902-2P25 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | F600C214 | 12603 | CLARK EQUIPMENT CO | | F600C214 | 14351 | TELEDYNE CONTINENTAL MOTORS INDUSTRIAL PRODUCTS DIV TELEDYNE INDUSTRIES INC SUB OF TELEDYNE INC | | AB0070857691 | 3NNX8 | BRIGHTON CROMWELL LLC | | AB0070857691 | 52993 | AR BEE CORP | | F600C214 | 89749 | CLARK MATERIAL HANDLING COMPANY | | 857691 | 89749 | CLARK MATERIAL HANDLING COMPANY |
|
Techincal Specification:
| CENTER HOLE KEYWAY DEPTH | 0.1850 INCHES NOMINAL | | CENTER HOLE KEYWAY QUANTITY | 1 | | CENTER HOLE KEYWAY WIDTH | 0.2580 INCHES NOMINAL | | CENTER HOLE SHAPE STYLE | ROUND W/KEYWAY | | CORNER SHAPE | CHAMFERED FIRST INSIDE CORNER | | CORNER SHAPE | ROUND THIRD OUTSIDE CORNER | | CORNER SHAPE | SQUARE FIRST OUTSIDE CORNER | | CORNER SHAPE | SQUARE FOURTH OUTSIDE CORNER | | CORNER SHAPE | SQUARE SECOND INSIDE CORNER | | CORNER SHAPE | SQUARE SECOND OUTSIDE CORNER | | CROSS-SECTIONAL SHAPE STYLE | SHOULDERED | | DIAMETER | 1.4540 INCHES NOMINAL | | FLANGE THICKNESS | 0.1562 INCHES NOMINAL | | OUTSIDE DIAMETER | 0.2950 INCHES NOMINAL | | OVERALL THICKNESS | 0.3085 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | SHANK OUTSIDE DIAMETER | 2.1875 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND | | SURFACE CONDITION | GROUND |
|
|