| MATERIAL | STEEL INNER MEMBER |
| STEEL ROD END BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND |
| 33.0 ROCKWELL C MAXIMUM ROD END BODY |
| SURFACE TREATMENT | CHROMIUM INNER MEMBER |
| CADMIUM ROD END BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 6430-80171-041,78286 MFR REF SINGLE TREATMENT RESPONSE INNER MEMBER |
| QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| STYLE DESIGNATOR | BALL TYPE |
| OVERALL LENGTH | 3.2400 INCHES MINIMUM AND |
| 3.3200 INCHES MAXIMUM |
| BORE DIAMETER | 0.3120 INCHES MINIMUM AND |
| 0.3125 INCHES MAXIMUM |
| OUTER MEMBER OUTSIDE DIAMETER | 0.9900 INCHES MINIMUM AND |
| 1.0100 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 2.7500 INCHES MINIMUM AND |
| 2.8100 INCHES MAXIMUM |
| OUTER MEMBER WIDTH | 0.3720 INCHES MINIMUM AND |
| 0.3820 INCHES MAXIMUM |
| INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND |
| 0.4370 INCHES MAXIMUM |
| STATIC RADIAL LOAD RATING | 8000 POUNDS |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK THREAD LENGTH | 1.2700 INCHES MINIMUM AND |
| 1.3300 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD DIAMETER | 0.375 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| SPECIAL FEATURES | KEYWAY LOCATED IN SHANK |
| TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 78286 |
| DESIGN CONTROL REFERENCE | 6430-80171-041 |