| BORE DIAMETER | 0.5620 INCHES MINIMUM AND 0.5625 INCHES MAXIMUM |
| BORE CENTER TO SHANK END DISTANCE | 3.5620 INCHES NOMINAL |
| HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM RACE INSERT |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM ROD END BODY |
| HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER |
| INNER MEMBER WIDTH | 0.5600 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM |
| LUBRICATION FEATURE | SELF-LUBRICATING LINER RACE LINER |
| OUTER MEMBER OUTSIDE DIAMETER | 1.5000 INCHES NOMINAL |
| OUTER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4420 INCHES MAXIMUM |
| OVERALL LENGTH | 4.3120 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5528 ASSN STD 2ND MATERIAL RESPONSE OR AISI ASSN STD 3RD MATERIAL RESPONSE RACE INSERT |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE INTERNAL ROD END BODY |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER |
| MATERIAL | STEEL COMP 440C INNER MEMBER |
| MATERIAL | STEEL COMP 630 OR STEEL COMP 631 OR STEEL COMP 410 RACE INSERT |
| MATERIAL | STEEL COMP E4340 INTERNAL ROD END BODY |
| SHANK STYLE | EXTERNALLY THREADED |
| SHANK END TO SHOULDER LENGTH | 2.4690 INCHES NOMINAL |
| SHANK THREAD LENGTH | 2.1570 INCHES NOMINAL |
| SPECIAL FEATURES | HOLLOW SHANK,0.437 IN. DIA,1.875 IN. MIN TO 1.937 IN. DP,COUNTERSINK 0.500 IN. DIA MIN TO 0.531 IN. DIA MAX BY 60.0 DEG |
| STATIC RADIAL LOAD RATING | 23200 POUNDS |
| STYLE DESIGNATOR | SHOULDERED BALL TYPE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | GSS 8050,FSCM 26512 MFR REF SINGLE TREATMENT RESPONSE ROD END BODY |
| SURFACE TREATMENT | CADMIUM ROD END BODY |
| TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3A |
| THREAD DIAMETER | 0.937 INCHES NOMINAL |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNEF |