|
|
|
National Stock Number:
3110-00-555-7493
Federal Supply Class:
3110
National Item Identification Number:
005557493
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 457A34 | 63665 | CEF INDUSTRIES INC ENVIRON DIV | | 457A34 | 78062 | SARGENT AEROSPACE & DEFENSE, LLC | | 4993L05X1MILG3278 | 24617 | GENERAL MOTORS CORP | | 4993L05X1MILG3278 | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | 4993L05X3CJ | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | A-A-59583 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | A6202-06 | 82005 | ALLARD NAZARIAN GROUP, INC. | | AA59583-405JENH | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | FF-B-171/03J05N2C | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | FF-B-171/3 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC |
|
Techincal Specification:
| BEARING SEAL TYPE | CONTACT | | BORE DIAMETER | 25.00 MILLIMETERS NOMINAL | | BORE SHAPE | STRAIGHT | | FEATURES PROVIDED | SNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE | | INTERNAL FIT-UP DESIGNATION | STANDARD | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE | | LUBRICATION MATERIAL | GREASE | | OVERALL OUTSIDE DIAMETER | 47.00 MILLIMETERS NOMINAL | | OVERALL WIDTH | 12.0 MILLIMETERS NOMINAL | | MATERIAL | STEEL BALL | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL INNER RING | | MATERIAL | STEEL OUTER RING | | MATERIAL | STEEL RETAINER | | RETAINER FABRICATION METHOD | PRESSED | | SEAL QUANTITY | 2 | | SPECIFICATION/STANDARD DATA | 58583-AA59583-405JENH MANUFACTURERS SPECIFICATION CONTROL | | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|