|
|
|
National Stock Number:
3110-00-554-3465
Federal Supply Class:
3110
National Item Identification Number:
005543465
Description:
BEARING,BALL,ANNULAR
Detail:
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME.
|
Manufacturer Information:
| 1208FF-1L1 | 21760 | SCHATZ BEARING CORPORATION | | 1208FFMILG3278A | 21760 | SCHATZ BEARING CORPORATION | | 208CFFB107A00675C0000-0 | 38443 | SKF USA INC. | | 208CFFMILG3278A | 38443 | SKF USA INC. | | 208KDDFS160 | 21335 | TIMKEN CO | | 208KDDMILG3278A | 21335 | TIMKEN CO | | 208PPTFG75A | 43991 | FAG BEARINGS CORPORATION | | 208PPTFMILG3278A | 43991 | FAG BEARINGS CORPORATION | | 208SFF | 38443 | SKF USA INC. | | 208SFF | 91936 | DUCHOSSOIS INDUSTRIES INC CHAMBERLAIN MRC DIV | | 27-073 | 91723 | GEORATOR LLC | | 6208-22JMILG3278A | 52676 | SKF USA INC. | | 6208-2Z/LHT64 | 0C858 | SKF USA INC | | 6208ZZCE1BT2 | 53035 | NSK CORP BEARING DIV | | 77508X1MILG3278A | 24617 | GENERAL MOTORS CORP | | 77508X1MILG3278A | 43334 | GENERAL MOTORS CORP DELCO MORAINE NDH DIV | | FF-B-171 | 81348 | FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | T77208MILG3278A | 60380 | TIMKEN AEROSPACE, INC DBA TORRINGTON PRODUCT | | W2-F-009 REV 0 ITEM 35 | 99300 | HARDING-WATERCRAFT INC | | W2-F-009 REV O ITEM 35 | 99300 | HARDING-WATERCRAFT INC | | W2-F-009-35 | 99300 | HARDING-WATERCRAFT INC |
|
Techincal Specification:
| BORE DIAMETER | 40.00 MILLIMETERS NOMINAL | | BORE SHAPE | STRAIGHT | | INTERNAL FIT-UP DESIGNATION | STANDARD | | LOAD DIRECTION | RADIAL | | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE | | LUBRICATION MATERIAL | GREASE | | OVERALL OUTSIDE DIAMETER | 80.00 MILLIMETERS NOMINAL | | OVERALL WIDTH | 18.0 MILLIMETERS NOMINAL | | MATERIAL | STEEL OVERALL | | RETAINER FABRICATION METHOD | PRESSED | | SHIELD QUANTITY | 2 | | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE | | SURFACE FINISH | GROUND |
|
|