| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| OUTER RING WIDTH | 0.5260 INCHES MINIMUM AND 0.5310 INCHES MAXIMUM |
| OVERALL LENGTH | 1.8810 INCHES MINIMUM AND 1.9330 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.9995 INCHES MINIMUM AND 1.0010 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 1074 WASHER |
| MATERIAL | STEEL COMP 8620H STUD |
| MATERIAL | STEEL COMP E50100 ROLLER |
| MATERIAL | STEEL COMP E52100 OUTER RING |
| NOMINAL THREAD SIZE | 0.438 INCHES |
| SPECIAL FEATURES | NAS516-A LUBRICATION FITTING IN STUD END; KEYWAY ON STUD END 0/8900 IN. MIN,0.0930 IN. MAX.WIDE BY 0.0730 IN. MIN 0.0790 IN. MAX DEEP FROM END OF STUD TO 0.7500 IN. MIN FROM WASHER FACE |
| STYLE DESIGNATOR | CAM FOLLOWER |
| STUD DIAMETER | 0.4370 INCHES MAXIMUM |
| STUD LENGTH | 1.3550 INCHES MINIMUM AND 1.4020 INCHES MAXIMUM |
| SURFACE TREATMENT | CHROMIUM OUTER RING OUTSIDE DIAMETER |
| SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 3A |
| THREAD LENGTH | 0.5890 INCHES MINIMUM AND 0.6360 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNF |