| MATERIAL | STEEL BALL |
| STEEL INNER RING |
| STEEL OUTER RING |
| COPPER ALLOY RETAINER |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| AMS 6490 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| AMS 4616 ASSN STD SINGLE MATERIAL RESPONSE RETAINER |
| STYLE DESIGNATOR | COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING |
| OVERALL WIDTH | 104.0 MILLIMETERS NOMINAL |
| BORE DIAMETER | 180.0 MILLIMETERS NOMINAL |
| OVERALL OUTSIDE DIAMETER | 320.0 MILLIMETERS NOMINAL |
| STANDARD TOLERANCE DESIGNATION | ABEC NO.3 |
| SURFACE FINISH | GROUND |
| RETAINER FABRICATION METHOD | MACHINED |
| LOAD DIRECTION | ANGULAR |
| INTERNAL CLEARANCE | 0.0680 INCHES NOMINAL AXIAL AND |
| 0.0200 INCHES MINIMUM RADIAL AND |
| 0.0220 INCHES MAXIMUM RADIAL |
| SPECIAL FEATURES | STABILIZED FOR OPERATION AT M 65 TO P 350 DEG F,MAX SURFACE FINISH UNGROUND SURFACES 125 UIN AA,GROUND SURFACES 32 UIN AA,RACEWAYS 10 UIN AA,PERMANENTLY MARK EACH BEARING W/SAME SERIAL NO.,/V/ ETCHED ON OUTER RINGS TO INDICATE DIRECTION OF THRUST |
| TEST DATA DOCUMENT | 81343-AMS2640 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND |
| 81343-AMS26A45 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 78286 |
| DESIGN CONTROL REFERENCE | 65951-11360-103 |