|
|
|
National Stock Number:
3040-00-572-8724
Federal Supply Class:
3040
National Item Identification Number:
005728724
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 10932788 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM | | 10932788 | T0720 | FNSS SAVUNMA SISTEMLERI ANONIM SIRKETI | | K4278 | G0768 | KANAKAS TH. & G. O.E | | 300993 | H0G87 | WIBA ZEVENAAR B.V. | | 2520005728724 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.9160 INCHES MINIMUM AND 0.9210 INCHES MAXIMUM | | FIRST END SPLINE LENGTH | 2.1250 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.9160 INCHES MINIMUM AND 0.9210 INCHES MAXIMUM | | FIRST END SPLINE MINOR DIAMETER | 0.7850 INCHES MINIMUM AND 0.7960 INCHES MAXIMUM | | FIRST END SPLINE QUANTITY | 14 | | FIRST END STYLE | SPLINED (STRAIGHT) | | FSC APPLICATION DATA | GEARCASE,TRANSFER TRANSMISSION,CARRIER,FULL-TRACKED | | LARGEST STEP DIAMETER | 1.5930 INCHES NOMINAL | | OVERALL LENGTH | 11.250 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL | | SECOND END DIAMETER | 1.3310 INCHES MINIMUM AND 1.3360 INCHES MAXIMUM | | SECOND END SPLINE LENGTH | 2.1250 INCHES MINIMUM AND 2.1880 INCHES MAXIMUM | | SECOND END SPLINE MAJOR DIAMETER | 2.1250 INCHES MINIMUM AND 2.1880 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 1.2260 INCHES MINIMUM AND 1.2360 INCHES MAXIMUM | | SECOND END SPLINE QUANTITY | 26 | | SECOND END STYLE | SPLINED (STRAIGHT) | | STEP QUANTITY | 9 | | SURFACE FINISH | 125.0 MICROINCHES |
|
|