| CASING MATERIAL | STEEL, SPRING |
| CASING SURFACE TREATMENT | FINISH PER SPEC NO. MIL-F-14072 |
| CASING LENGTH BETWEEN FERRULES | 21.880 INCHES NOMINAL |
| CASING OUTSIDE DIAMETER | 0.406 INCHES NOMINAL |
| CASING PROTECTIVE DEVICE TYPE | RUBBER COVER |
| END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| THREAD LOCATION | EXTERNAL BOTH ENDS |
| SCREW THREAD SERIES DESIGNATOR | UNF BOTH ENDS |
| THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| THREAD CLASS | 3A BOTH ENDS |
| THREAD LENGTH | 0.563 INCHES NOMINAL BOTH ENDS |
| END OVERALL DIAMETER | 1.000 INCHES NOMINAL BOTH ENDS |
| SWIVEL END | NOT PROVIDED BOTH ENDS |
| LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CORE MATERIAL | STEEL |
| CORE OVERALL LENGTH | 25.250 INCHES NOMINAL |
| CORE DIAMETER | 0.150 INCHES NOMINAL |
| CORE ROTATION DIRECTION | CLOCKWISE |
| END TYPE | ROUND, INTERNAL SPLINED BOTH ENDS |
| TIP LENGTH | 1.750 INCHES NOMINAL BOTH ENDS |
| CROSS SECTION SIZE AND LOCATION | 0.500 INCHES NOMINAL DIAMETER BOTH ENDS |
| SETSCREW | NOT INCLUDED BOTH ENDS |
| SPLINE TYPE | INVOLUTE BOTH ENDS |
| SPLINE QUANTITY | 12 BOTH ENDS |
| SPLINE MAJOR DIAMETER | 0.271 INCHES NOMINAL BOTH ENDS |
| SPLINE MINOR DIAMETER | 0.239 INCHES NOMINAL BOTH ENDS |
| SPLINE LENGTH | 0.437 INCHES NOMINAL BOTH ENDS |
| PITCH DIAMETER | 0.250 INCHES NOMINAL BOTH ENDS |
| SPLINE PRESSURE ANGLE IN DEG | 14.5 BOTH ENDS |
| CORE REMOVABILITY | NONREMOVABLE |
| OVERALL LENGTH | 25.250 INCHES NOMINAL |
| TORSIONAL DEFLECTION RATING | 6 DEG FT LB IN. TORSIONAL DEFLECTION RATING FOR WINDING AND UNWINDING |
| MINIMUM OPERATING RADIUS | 3.500 INCHES |
| SPECIAL FEATURES | COUNTERCLOCKWISE CORE ROTATION DIRECTION,TORSION STRENGTH WINDING DIRECTION 17.0 LBS.THREAD SIZE IS 3/4-16.FINISH PER SPEC NO. MIL-F-14072. |
| FSC APPLICATION DATA | RADAR SET,NONAIRBORNE,EXCEPT FIRE CONTROL AND GUIDED MISSILE |